Mechanical Engineer Lighting fixtures and lighting control systems Total Lighting Controls and Lighting Systems Firmware Support Engineer Circuit Breaker Design Engineer [Mechanical] Circuit Breaker Design Engineer [Electrical] Mechanical Designer – Meters CAE Analytical Engineer Quality Engineer for Enclosed Products Engineer - Design Support -Automatic Transfer Switch Senior Design Engineer – Equipment Design Engineer – Equipment

Mechanical Engineer
COS # 393917
Location: Hyderabad, India
Essential Functions (Responsibilities)
Thermal analysis of lighting fixtures and lighting control systems containing mechanical, electrical, and electromechanical components and subsystems.
Layout, arrangement, and packaging of lighting and lighting controls systems and components.
Responsible for UL thermal and mechanical certification of new product.
Learn and follow the GELS NPI process.
Integrate fully with the GELS/TLC/ATC/IBC engineering team to produce the World’s Best Lighting and Controls package.
Qualifications/ Requirements
B. Ttech / M Tech in mechanical engineering with more than 2 years of experience in Thermal Evaluation and problem resolution in Mechanical Design.
Exposure to UL or other 3rd party certification
Strong analytical, computer, and troubleshooting skills
Good Team player.
Good Communication Skills.
Desired
Green Belt Certified
Email Resume

Total Lighting Controls and Lighting Systems –
Firmware Support Engineer
COS # 393919
Location: Hyderabad, India
Essential Functions (Responsibilities)
Design and support of microprocessor based lighting controllers including interfacing to hardwired and wireless networks as well as electromagnetic and electronic ballasts.
Assist in development and support of Total Lighting Controls microprocessor based astronomical clock/controller.
Firmware support in the systems upgrade of legacy Total Lighting Controls product.
Learn and follow the GELS NPI process.
Integrate fully with the GELS/TLC/ATC/IBC engineering team to produce the World’s Best Lighting and Controls package.
Qualifications/ Requirements
B-tech / M-tech in Electrical /Electronics/Communication engineering with 0-3 years of experience.
The candidate must be proficient in using IDEs for micro controllers and proficient in C and ALP of at least one micro controller
Awareness/experience of Micro-controller firmware, communication protocols both wireless and wired communication.
Good Team player.
Desired
Green Belt Certified
Experience in the following
· Firmware development
· Demonstrated project management skills
Email Resume

Circuit Breaker Design Engineer [Mechanical]
Job Code: 382024
Essential Functions/Responsibilities:
Experience in Low Voltage Breakers Mechanism Design preferably Stored Energy systems used in Air circuit breakers or MCCB mechanisms or their Accessories
Job involves Design of Mechanism parts / Linkages to meet functional requirement of the Breaker.
Innovative ideas for part count reduction,Simplification and robust mechanism Design is essential.
Strong Materials,heat treatment and Process knowledge is required to achieve Reliable Designs.
Must be able to develop mathematical Models for optimizing the Link Geometry,Forces & Linkage Movements.
Qualification/Requirement
Position : Mechanical Design Engineer
Qualification : B.Tech / B.E / M.Tech [Mechanical]
Experience : 5 to 8 years
The person should have had exposure to ACB / Mccb Accessories Design,Mechanical Design,Transfer Functions,Optminsation of Forces,Linkage Movements
Desired:
Pro-Engineer, Pro-Mechanica, Motion Simulation
Matlab
Email Resume
Circuit Breaker Design Engineer [Electrical]
Job Code : [382033]
Essential Functions/Responsibilities:
The person would work in Air circuit Breaker & MCCB Current path design.
He would be required to calculate constriction forces, Contact Blow open thresholds, Mathematical modeling of Contact Depression, Contact Forces.
Exposure to Arc Runner, Arc Chamber design with knowledge of Short circuit behavior of contact system and venting of arc products will be an added advantage.
Must be able to develop Mathematical models of contact forces and blow open forces calculations.
Qualification/Requirement
Position : Electrical Design Engineer
Qualification : B.Tech / B.E [Electrical]
Experience : 4 to 5 years
Desired:
The person should have had exposure to Acb / Mccb Current Path Design, Current Path Design,Arc Chamber Design,Thermal / Heat Rise Calculations,Repulsion Forces Calculations Previous experience in Contact system design, Selection of material, Contact tips, Welding & Brazing process knowledge is desired
Pro-Engineer,Matlab,Ansys
Email Resume

CAE Analytical Engineer
Job Code : [382047]
Essential Functions/Responsibilities:
The person would be required to develop Thermal Model of Breakers and Switch gear For Heat rise optimization. He would be a part of the Core Design Team to understand Design Requirements Translate into a Analysis problem and optimize the Design Solution He would develop Electro magnetic Models of Circuit Breaker Contact Systems to Optimize Blow Open forces and Current withstand capacity.
Develop Arc Chamber venting Model using CFD tools to Optimize the emission of Arc products and deionization.
Qualification/Requirement
Position : CAE Analytical Engineer
Qualification : B.Tech / B.E / M.Tech [Mechanical]
Experience : 8 to 10 years
Desired:
Electro Thermal Analysis
Electro Magnetic Analysis
CFD Analysis Pro Engineer,Ansys, Magnet, Fluent.
Email Resume

Tool Engineer (Gauges/ Fixtures)
Job COS : 390540
Location: Hyderabad, India
Essential Functions (Responsibilities)
Providing End solutions to the internal customer tooling needs, to improve Quality and productivity.
Design, development and prototyping of Gages, Assembly Fixtures and Welding fixtures.
Responsibility includes the tryout and proving of the tooling, and conducting Gage R&R.
Gage design to check part level and Assembly level Critical to Quality characteristics.
Assembly fixture design for the part assembly lines.
Welding fixture design for brazing parts.
Qualifications/ Requirements
PDTD or PGTD from CITD or similar with 4+ years of experience
Working knowledge on Pro-E
Knowledge of quality tools like process and design FMEA, Six sigma added advantage.
Excellent communication skills : Ability to Express Ideas / Views to the cross functional and Cross cultural teams very critical.
Desired
Design exposure in Automation techniques using Pneumatics is highly desirable. Exposure to the selection and use of sensors will be a great advantage.
Email Resume

Mechanical Designer – Meters
Job COS = 390550
Qualification: B.E/B.Tech. in Mechanical
Experience: Min 2 years experience in design projects from concept to manufacture.
Tasks:
Concepts generation,
Designing of Plastic Injection molded parts & sheet metal parts, (DFM/DFA)
Geometric tolerance & dimensioning,
Understanding international product standards like IEC, ANSI etc
And making of test plans and procedures.
Drawing Changes - Image Files editing
Skills:
Product Design & Manufacturing
ProE-
3D modeling,
Sheet Metal,
Cabling,
Detailing/drafting
Tolerance analysis (using CeTol)
Excel,
Power point,
Good communication skills - written and verbal.
AutoCAD
Image Editing Software
Experience in Meter product line is added advantage.
Email Resume

Quality Engineer for Enclosed Products
COS # 393920
for Enclosed Products
Purpose:
To drive quality related projects for Enclosed products like load centers, Meter socket load centers, safety switches, QMR and ADS switches….
To support Product owner in daily activities.
Principal duties and responsibilities:
Project execution involving dimensional tolerance analysis, kinematics analysis, Structural and electro-mechanical analysis.
Project generation, which will result in reducing warranty and number of defects in products.
To support manufacturing plants in correcting BOM, approving waivers, controlling internal quality defects.
Maintain and own a deck of quality projects.
Accountabilities:
Reduce warranty and number of defects, both Internal (manufacturing plant) and External (customers).
On time project execution, timely support to plants.
Completion of Change requests and change notices (long range)
Qualification required:
BE/B Tech in Mechanical Engineering/Industrial production
Part modeling, Assembly modeling, drawing creation using Pro Engineer
Structural and Electro-mechanical analysis using Ansys
Skills with software like AutoCad, RasterCad
Minimum 4 year experience in CAD/CAM/CAE
Manufacturing knowledge in any industry
Qualification desired:
Tool Engineering background with knowledge of manufacturing processes (stamping, molding, casting, extrusion, rolling…) and assembly line operations.
Experience related to switch gear, breakers, enclosures
Kinematics analysis using Pro Mechanica or working model.
Exposure to Six sigma methodologies.
Email Resume

Engineer - Design Support -Automatic Transfer Switch
COS # 393926
Location: Hyderabad, India
Essential Functions (Responsibilities)
Provide design support for Automatic Transfer Switch product line. This involves working on design, development and introduction of new products and improvements to existing products
Execute product cost reduction & quality improvement programs
Support manufacturing plants on quality issues and cost-out projects
Work effectively with global teams
Perform mechanical analysis using tools like Pro/Mechanica, Cetol, ANSYS
Qualifications/ Requirements
Bachelors Degree in mechanical engineering with 2-3 years experience in Switchgear industry
Proficiency in ProE/AutoCAD
Hands on experience in Modeling and Detailing of mechanical components, sheet metal enclosures etc using ProE
Design Experience related to Low Voltage electrical equipment
Strong initiative and ability to work independently
Desired
Green Belt Certified
Exposure to type tests requirements and coordination with Test Labs
Familiarity with software package such as ANSYS
Email Resume

Senior Design Engineer – Equipment
Location: Hyderabad, India

Essential Functions (Responsibilities)
As Part of Global Equipment Technology team will be working on Growth/VCP programs
Will be responsible for the integrity of the design & documentation to GE / certification standards.
Need to work with Project Leaders to execute the programs utilizing the “A” /”C” change process
Need to liaise with Product Owners for necessary information/reviews
Develop DFSS scorecards to the respective design during the development cycle.
Lead “C” change programs
Qualifications/ Requirements
Electrical/Mechanical Engineering Graduate
2- 4 years Design Experience on Switchboard/Panelboard/PCC/MCC/Busduct product lines
Design and develop Sheetmetal Enclosures, Busbars etc.
Good understanding of Indian and IEC standards related to enclosed equipment products
Exposure to type tests requirements and coordination with Test Labs
Ability to work on ProE or anyother 3D package will be an advantage
Desired
Green Belt Certified
ProE knowledge
Email Resume

Design Engineer – Equipment
COS # 394878
Location: Hyderabad, India

Essential Functions (Responsibilities)
As Part of Global Equipment Technology team will be working on Product support function
Will be responsible for the integrity of the design & documentation to GE / certification standards.
Need to work alongwith Product Owners for necessary information
Support Product Owner in solving critical Quality issues
Qualifications/ Requirements
Electrical Engineering / Mechanical Engineering Graduate
2- 4 years Design Experience on Switchboard/Panelboard/PCC/MCC/Busduct product lines or any Sheetmetal enclosed products
Good Knowledge on ProE or other 3D packages
Desired
Green Belt Certified
Email Resume